-
-
380Vac 5500W 1500RPM 6P Permanent Magnet Synchronous Motor
- Model Number:VOL-HSC132S15-5.5
- Type:PMSM Motor
- Output Power:5500W
- Voltage:380Vac
- Speed Range:1500RPM
Brand Name: | Volcano Electric | Model Number: | VOL-HSC132S15-5.5 | Type: | PMSM Motor |
Output Power: | 5500W | DC Voltage: | 380Vac | Speed Range: | 1500RPM |
Controller: | Customized, Optional | Braker: | Optional | Insulation Class: | Class F/H |
Enclosure: | IP55 | Poles: | 6P | Wire: | 100% copper |
Housing: | Aluminum Frame | Efficiency: | IE4 | Duty: | S1 (continuous) |
Place of Origin: | Zhejiang, China (Mainland) | Standard: | Permanent Magnet motors | ||
Application: |
Product Description
Model VOL-HSC132S15-5.5 380Vac PMSM moto ris IEC4-level efficiency, part of the selection can even reach IEC5 level. It can also maintain high efficiency under high torque and high current, and it is very competitive among peers. And the motor runs reliably and stably with constant rotating speed. The motor is equipped with the fan, which can run stably at low temperature under full load. Moreover, the motor has strong adaptability and learning ability, which is suitable for many occasions and widely used in many industries.
Permanent magnet synchronous motor also has the advantages of high starting torque, short starting time and high overload capacity, which can reduce the installed capacity of equipment driving motor according to the actual shaft power, save energy and reduce the investment of fixed assets. Permanent magnet synchronous motor (PMSM) is easy to control, with constant rotating speed, which does not change with the fluctuation of load and voltage, but only depends on frequency, and runs stably and reliably. Due to the strict synchronization of rotating speed and good dynamic response performance, it is suitable for frequency conversion control.
If you are interested for this model, please feel free to contact us by info@volcanomotor.com
Configuration:
PMSM motor list
Type | Pole | Power(Kw) | Voltage(V) | Current(A) | Start Type | Torque(Nm) | Speed(r/min) | Efficiency(%) | IP | Hz | Cooling Mode |
HSC132S15-5.5 | 6 | 5.5 | 380 | 9.5 | Y | 34.98 | 1500 | 92.10% | IP55 | 75 | IC411 Self-cooling Fan |
HSC132S15-7.5 | 6 | 7.5 | 380 | 13 | Y | 47.8 | 1500 | 92.60% | IP55 | 75 | IC411 Self-cooling Fan |
HSC132S15-11 | 6 | 11 | 380 | 18.7 | Y | 70 | 1500 | 93.60% | IP55 | 75 | IC411 Self-cooling Fan |
HSC132M15-15 | 6 | 15 | 380 | 25.2 | Y | 95.5 | 1500 | 94.00% | IP55 | 75 | IC411 Self-cooling Fan |
HSC160M15-18.5 | 6 | 18.5 | 380 | 31 | Y | 117.8 | 1500 | 94.30% | IP55 | 75 | IC411 Self-cooling Fan |
HSC160M15-22 | 6 | 22 | 380 | 37 | Y | 140.1 | 1500 | 94.70% | IP55 | 75 | IC411 Self-cooling Fan |
HSC180M15-22 | 8 | 22 | 380 | 37 | Y | 140.1 | 1500 | 94.70% | IP55 | 100 | IC411 Self-cooling Fan |
HSC180L15-30 | 8 | 30 | 380 | 50.1 | Y | 191.1 | 1500 | 95.00% | IP55 | 100 | IC411 Self-cooling Fan |
HSC180L15-37 | 8 | 37 | 380 | 54 | Y | 235.7 | 1500 | 95.30% | IP55 | 100 | IC411 Self-cooling Fan |
HSC200L15-30 | 8 | 37 | 380 | 50.1 | Y | 191.1 | 1500 | 95.00% | IP55 | 100 | IC411 Self-cooling Fan |
HSC225S15-37 | 8 | 37 | 380 | 64 | Y | 235.7 | 1500 | 95.30% | IP55 | 100 | IC411 Self-cooling Fan |
HSC225S15-45 | 8 | 45 | 380 | 77.9 | Y | 286.5 | 1500 | 95.60% | IP55 | 100 | IC411 Self-cooling Fan |
HSC225S15-55 | 8 | 55 | 380 | 94 | Y | 350 | 1500 | 95.80% | IP55 | 100 | IC411 Self-cooling Fan |
HSC225M15-75 | 8 | 75 | 380 | 128 | Y | 478 | 1500 | 96.00% | IP55 | 100 | IC411 Self-cooling Fan |
HSC250M15-55 | 8 | 55 | 380 | 91.8 | Y | 350 | 1500 | 95.80% | IP55 | 100 | IC411 Self-cooling Fan |
HSC250M15-75 | 8 | 75 | 380 | 128 | Y | 478 | 1500 | 96.00% | IP55 | 100 | IC411 Self-cooling Fan |
HSC280S15-55 | 8 | 55 | 380 | 90.3 | Y | 350 | 1500 | 96.20% | IP55 | 100 | IC416 Independent Fan |
HSC280S15-75 | 8 | 75 | 380 | 126 | Y | 478 | 1500 | 96.40% | IP55 | 100 | IC416 Independent Fan |
HSC280S 15-90 | 8 | 90 | 380 | 154 | Y | 573 | 1500 | 96.60% | IP55 | 100 | IC416 Independent Fan |
HSC280S15-110 | 8 | 110 | 380 | 178 | Y | 700 | 1500 | 96.40% | IP55 | 100 | IC416 Independent Fan |
HSC280M15-132 | 8 | 132 | 380 | 222 | Y | 840 | 1500 | 96.60% | IP55 | 100 | IC416 Independent Fan |
HSC315S15-132 | 8 | 132 | 380 | 222 | Y | 840 | 1500 | 96.20% | IP55 | 100 | IC416 Independent Fan |
HSC315S15-160 | 8 | 160 | 380 | 271 | Y | 1020 | 1500 | 96.80% | IP55 | 100 | IC416 Independent Fan |
HSC315M15-185 | 8 | 185 | 380 | 319 | Y | 1177 | 1500 | 97.10% | IP55 | 100 | IC416 Independent Fan |
HSC315M15-200 | 8 | 200 | 380 | 350 | Y | 1273.8 | 1500 | 97.20% | IP55 | 100 | IC416 Independent Fan |
HSC315M15-220 | 8 | 220 | 380 | 420 | Y | 1400.7 | 1500 | 97.40% | IP55 | 100 | IC416 Independent Fan |
HSC315M15-250 | 8 | 250 | 380 | 437.5 | Y | 1592 | 1500 | 97.70% | IP55 | 100 | IC416 Independent Fan |
HSC355M15-280 | 8 | 280 | 380 | 490 | Y | 1782 | 1500 | 97.70% | IP55 | 100 | IC416 Independent Fan |
HSC355M15-315 | 8 | 315 | 380 | 552 | Y | 2005 | 1500 | 97.70% | IP55 | 100 | IC416 Independent Fan |
HSC355M15-355 | 8 | 355 | 380 | 623 | Y | 2260 | 1500 | 97.70% | IP55 | 100 | IC416 Independent Fan |
HSC355M15-375 | 8 | 375 | 380 | 658 | Y | 2387 | 1500 | 97.70% | IP55 | 100 | IC416 Independent Fan |
Advantages of PMSM motor:
Lower Maintainance and longer lifetime
Lower noise - the elimination of brush contact
Higher power to weight ratio
Higher efficiency ( in general higher than 90%)
Lower temperature rise-more efficient heat dissipation due to winding construction
Reduction of EMI
For customized DC Motors, please contact our technician, Ordinary, we have to know the following information to get a professional proposal:
Brushed or Brushless Customer preference
Output power (W) Horsepower/watts/torque rated at full load speed
Voltage (V) i.e 12v DC …….. 220v AC
Motor speed (RPM) Revolutions per minute of the shaft at full load Voltage
Application e.g. traction, airconditioning, etc.
Duty Most motors are rated continuous. Some applications however may use motors designed for intermittent duty
Configuration/Frame Our products are according to IEC standard, we also can customize the flange and shaft according to the customer drawing
Controller function e.g. forward/reverse, variable speed, acceleration profile, etc.