120mm Winding Stator With Rotor Shaft

Product Description

Our motor core is made of imported equipment from Japan. It uses silicon steel material with good magnetic permeability and small iron loss. The produced motor core is not only durable, but also has higher speed precision control. 

During the production process, the stator chips are all The high-speed punching machine is punched out with high precision. The mold is made of tungsten steel inserts, tungsten steel punches, and the production of precision guide columns. It has the characteristics of high production efficiency, stable mold production, etc., and guarantees that there will be no problems such as loose film. 

Product size The outer circle is between 20-120; after final production, it is pressurized and tested on the automatic press..

We insist that quality and honesty come first. Waiting for you and feel free to contact our team at info@volcanomotor.com for any technical support.

Multi Strands Showing

Motor construction

Brushless dc motor also have the stator and rotor same like the common dc motor, but it cancel the brushes. The stator used by silicon steel sheet and the rotor make by permanent magnet. It can be 2 poles to 8 poles just as you wish. Different with the brushes dc motor, the commutation of the BLDC motor is electronically controlled. We will use the hall sensors to do it. Also can use the magnetic encoder.

Specifications

Detailed Images

WE CAN MAKE ACCORDING  TO YOUR  REQUIRMENT

Winding stator and rotor list

Advantage of our single tooth winding stator and rotor

• Reduce eddy current

• Lower noise

• Cools the stator core

• Reduces hysteresis loss

• Higher coil filling achievable. We can control 90% for High voltage, while 80% for low voltage

• Various stamping tools available to save initial design

• Large material savings compared to one piece stator

• Various grade of magnet

• Better magnetic properties, low demagnetization rate, and high magnetic consistence

• Multi-poles ring magnet: more stable & stronger magnetic flux to lower motor space and improve performance and lower spacer
  

Designed experiences for winding stator and rotor

For customized DC Motors, please contact our technician. Ordinary, we have to know the following information to get a professional proposal:

• Brushed or Brushless   Customer preference

• Output power (W)   Horsepower/watts/torque rated at full load speed

• Voltage (V)   i.e 12v DC …….. 220v AC

• Motor speed (RPM)   Revolutions per minute of the shaft at full load Voltage 

• Application   e.g. traction, airconditioning, etc.

• Duty     Most motors are rated continuous. Some applications however may use motors designed for intermittent duty

• Configuration/Frame    Our products are according to IEC standard, we also can customize the flange and shaft according to the customer drawing 

• Controller function     e.g. forward/reverse, variable speed, acceleration profile, etc.