Tex: +86-574-89065086 | Email: info@volcanomotor.comone-stop partner for motors & motor drives designing and manufacturing

Volcano Motor

Home > FAQ

On initial installation, motor fails to start up

2016-07-22 09:42:48 Volcano Motor Read

Likely cause: Motor is incorrectly wired 

What to do: Verify that the motor is wired correctly. 


Likely cause: No output power from controller. 

What to do: Measure voltage coming from the controller. 


Likely cause: Motor is damaged and the armature is rubbing against the magnets. 

What to do: Disassemble motor and see if the armature can be realigned by reassembly. Motor may have to be replaced.

Copyright © Ningbo volcanic electric co.,LTD