150W Brushless DC Motor In Textile Machinery
- Model Number:BLDC0.150-47
- Type:BLDC Motor
- Output Power:50W-180W
- DC Voltage:70V DC
- Speed Range:5000 RPM
- Poles:10 poles
|Brand Name:||Volcano Electric||Model Number:||BLDC0.150-47||Type:||BLDC Motor|
|Output Power:||50W-180W||Voltage:||70V DC||Speed Range:||5000 RPM|
|Controller:||Customized, Optional||Braker:||Optional||Insulation Class:||Class F|
|Enclosure:||IP44 (IP68 Optional)||Poles:||10 poles||Wire:||100% copper|
High efficiency 90%
|Duty:||S1 (continuous)||Place of Origin:||Zhejiang, China (Mainland)||Standard:||OEM, Quantum series Brushless DC motors|
|Application:||Textile machinery, packing machine, automatic conveyor belt etc.|
Any one of the below requirements.
1.Variable speed application
2.Require High Start Torque
3.Low /High speed application
4.Minimize Motor size demands
5.Customized Speed, work at any defined speed, ( the rated speed of AC motor is limited, 2 poles-3000RPM, 4 poles -1500RPM @50HZ, 2 poles-3600RPM, 4 poles -1800RPM @60HZ)
Quantum series Brushless DC motors are customized motors, which are designed for textile machinery industry. Based on various demands, this series brushless DC motors are divided into 3 motor model. PMSM-42, PMSM52, PMSM-62. You can refer to the drawing and properties.
Characteristics of Quantum series brushless DC motors
Using the international advanced materials technology, Produce high speed, high torque small motors, which has servo characteristics.
1.Adopt over 5 pairs magnetic poles design, the ability to start and stop fast.
2.High efficiency ≈90%
3.Achieve high output power in small motor frame
4.Can be equipped with the encoder to achieve servo control
5.Economic benefits, high cost-effective
The rotor is made by sintered neodymium Magnet halbach ring. In the market, the similar motors are made by bonded neodymium magnets, which the BH max. is limited at 10 MGOe, And now with our sintered neodymium magnet halbach ring technology, the BH max. is reach to 40 MGOe, which increase the magnetic density almost 4 times. The magnetic density is stronger, and it can reduce the coils of stator.
Hence, you can get the following benefits with this PMSM motor.
1.Minimized Motor size. ( smaller than conventional motors)
3.Minimize the copper loss
This PMSM Motor is designed to apply to servo applications, as long as it is equipped with the encoder to achieve servo control, high precision servo application can be realized with the encoder.
This 150W 5000RPM 70VDC Brushless DC Motor is used in bobbin winder automatic system, this motor is replacing the conventional electric motors. The efficiency of the motor is increased almost 8%-15%. And because of 10 poles systems, the motor start and stop is much faster on the line. We designed three various PMSM motors by customer’s demands. For more specifications on this leading motors, please contact our technical team by email firstname.lastname@example.org
This PMSM motors can be also well used in other textile machinery, packing machine, automatic conveyor belt etc.
Generally, whatever standard motors or customized motors, our professional team can help you work them out.
Advantage of PMSM motors
Lower maintenance and longer lifetime- no brush and commutator erosion
Lower noise-the elimination of brush contact
Higher power to weight ratio
Higher efficiency ( in general higher than 90%)
Lower temperature rise-more efficient heat dissipation due to winding construction
Reduction of EMI
For customized PMSM Motors, please contact our technician, Ordinary, we have to know the following information to get a professional proposal:
Brushed or Brushless Customer preference
Output power (W) Horsepower/watts/torque rated at full load speed
Voltage (V) i.e 12v DC …….. 220v AC
Motor speed (RPM) Revolutions per minute of the shaft at full load Voltage
Application e.g. traction, airconditioning, etc.
Duty Most motors are rated continuous. Some applications however may use motors designed for intermittent duty
Configuration/Frame Our products are according to IEC standard, we also can customize the flange and shaft according to the customer drawing
Controller function e.g. forward/reverse, variable speed, acceleration profile, etc.